Page 4 of 5
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
STEP 3: Using a Screwdriver, apply firm pressure while turning Bolt CLOCKWISE until Bolt begins to
slip indicating the barrel has crimped against inside of drywall. Completely back out and remove Bolt
from Wall. Place bracket on wall, align hole and replace Bolt. Firmly tighten to secure bracket.
FIRST
THEN
STEP 4: Once Bracket (D) is secured to wall, align and engage Bracket on back of Cabinet (E)
with Bracket on wall. First, lift Cabinet Bracket over Wall bracket then gently slide Cabinet down to
lock both into place.
Wall Side
Wall Side
(D)
(D)
(E)
(E)
