Page 3 of 5
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
STEP 1: Determine location for cabinet then use a Level and Pencil to position and mark location
for Wall Bracket (D). Use Screws (A) in Wall Stud and Expansion Bolt (C) in open drywall.
NOTE: See Steps 2 and 3 for Expansion Bolt installation.
For maximum support, at least three holes
should be centered on a WALL STUD.
SAFETY NOTICE
(A)
(C)
(D)
STEP 2: EXPANSION BOLT For holes located in open drywall (no Wall Stud) pencil mark location
and use a drill and 1/4” bit to make a small pilot hole. Gently tap Expansion Bolt (C) into hole until
teeth sink into wall surface.
(C)
Teeth
FIRST
THEN
WALL
STUD
