Page 3 of 4
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
STEP 1: Determine location for installation then use level to position Bracket (E) on wall. Mark
screw hole locations with pencil. NOTE: For maximum support, it is preferred to center two
sets of screws over wall studs. If this is not possible, at least one set must be over a stud.
For screws NOT positioned over a wall stud, drill pilot holes and install Expansion Bolts (B).
The Bracket must be secured to the wall in at least two locations with two sets of screws.
Use screwdriver to mount Bracket over marked locations on wall. Use Wood Screws (A)
through Bracket into a stud and Expansion Bolts (B) into drywall. NOTE: At least two
sets of screws must be mounted into a wall stud.
STEP 2:
At least one set of screws (preferably two)
must be secured to a wall stud.
WALL
(E)
(A)
(B)
(B)
