Page 3 of 5
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Use Wall Anchors in open drywall. Do not use when wall stud is present.
Mark location. Use pointed tool to make
a very small pilot hole.
Gently tap tip of Anchor into pilot hole
then use a screwdriver and turn it in until
flush with wall surface.
Add item/Align holes. Add/tighten screw.
INSTALLING SCREW-TYPE WALL ANCHORS
1
3
2
Fig. 3
(C)
STEP 2: Carefully lift Wall Bracket (C) to Screw heads and push/pull down to lock in place.
For maximum support, at least one hole should
be centered on a WALL STUD.
INSTALLATION TIP
Use Wall Anchors in open drywall. Do not use when wall stud is present.
SCRE
W
