Page 3 of 7
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
STEP 1: Front and back of Frame (G) connected by folding hinges. Carefully pull Frame apart and
straighten hinges as illustrated. Position attached Support Brackets, align holes then insert Allen Bolt
(C) with Flat Washer (D). Insert ALL Bolts and Washers on all Support Brackets then fully tighten and
secure using Allen Wrench (E).
Pinch Point Hazard
Folding Hinge Brackets
CAUTION
(C)
(D)
(E)
Support Brackets
Folding Hinge Brackets
STEP 2: Carefully insert an Grid Box (I) into upper compartment in Frame (G). Orient Box with label(s)
facing down toward Legs on Frame. Insert LARGE SCREWS (B) through hole in pre-installed Tabs
mounted onto Frame. Fully tighten using a Phillips Screwdriver.
(G)
(I)
(G)
(B)
Assemble in location for intended use.
SAFETY NOTICE
Boxes MUST be secured to Frame using Screws.
