Page 4 of 4
STEP 4: ATTACH SUPPORT SLATS TO SIDE RAILS
Align pre-drilled holes in each end of Support Slats (I) with pre-drilled holes in the ledge of the Side
Rails (H) and using Screws (D), firmly secure each with a screwdriver.
(H)
(I)
(D)
STEP 4: ADJUST LEVELERS
If necessary, each Support Slat may be leveled by adjusting Leveler located under each Support
Foot (J). Carefully raise off floor and turn clockwise/counterclockwise to adjust.
(J)
NOTE: Install Support Slat without Support
Foot NEAREST Footboard so Foot is not
visible after bed is assembled.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Cleaning and Care
Periodically dust with a soft, dry cloth.
Protect surfaces to prevent damage.
Do not use alcohol based cleaners or polishers.
