NOTE: Before starting installation of this Fixture or the removal of a previous Fixture,
disconnect the power by turning off the circuit breaker or removing the fuse from the fuse box.
STEP 1:
Unscrew the Bolts (F) from the Lamp Base (A) using
the Allen Wrench (G). Affix the Lamp Stretcher (B) to
the Lamp Base at the top and bottom by screwing in
the Bolts. Tighten using the Allen Wrench Provided.
STEP 2:
Squeeze the Harp (D) ends into the Saddle of the
Lamp Body (A). Place the Shade (not included) over
the Harp top. Secure the Shade to the Harp by
screwing on the Finial (C) and Rubber Ring (E).
Tighten until snug.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Page 3 of 4
(G)
(B)
(E)
(D)
(A)
(A)
(F)
(C)
