STEP 3: CHARGING
Insert the small plug into the port on the back of
lamp base. Plug Charger/Adapter into a standard
indoor wall outlet.
NOTE: Charger will illuminate a solid RED light to
indicate active charging. A solid GREEN light will
illuminate to indicate charging is complete.
Full charge takes approximately 2 hours.
AC/DC ADAPTER
INPUT: 100-240v - 50/60Hz
OUTPUT: 12.6v/2A
Environmental Protection
The symbol on this product indicates that waste electrical products should not be
disposed with household waste. Please recycle where facilities exist. Check with
your local authority or retailer for recycling advice.
FCC Instruction
Caution: Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the recieving antenna.
-Increase the separation between the equipment and receiver.
-Connect equipment to an outlet on a circuit different from that to which the reciever is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Page 4 of 4
Cleaning & Care:
To clean, wipe with a soft, dry cloth.
