STEP 1:
Squeeze the Harp (C) ends into the Saddle of the
Lamp Body (A).
Place the Shade (not included) over the Harp (C) top
Secure it on top by screwing on the Finial (B) and
Rubber Ring (D) until it is snug.
STEP 2:
Screw in bulb. This Lamp has been rated for up
to a 100 Watt MAX type A bulb or 25 Watt CFL bulb
(NOT INCLUDED).
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Page 3 of 3
(A)
(D)
Cleaning & Care:
To clean, wipe the Fixture with a soft, dry cloth.
Avoid the use of harsh or abrasive
chemicals as they may damage the finish
(C)
(B)
