Page 4 of 6
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
STEP 3: Gently fit dowel on end of Seat (R) into hole on Left Arm (O) and Right Arm (P). Position
L-Bracket (G) as illustrated then insert 110mm Screw (E) from side into Seat. Add 25mm Screw (F) to
bottom and tighten both using Allen Wrench (N). Finally, fully secure Seat to both arm by inserting 70mm
Screws (H) through Seat and into Arms as illustrated. Use Allen Wrench to full and firmly tighten.
STEP 4: Attach Back (G) to Left (O) and Right (P) arms using 90mm Screws (I). Tighten using Allen
Wrench (N). Attach Seat (R) to Back using 50mm Screws (J). Firmly tighten using Allen Wrench.
(G)
(O)
(P)
(I)
(R)
(J)
(J)
(I)
(R)
(O)
(P)
(G)
(E)
(F)
(R)
