(F)
(G)
(D)
NOTE: WHEN LEANING MIRROR AGAINST WALL IT MUST BE ACHORED
TO A WALL STUD AND IN NO WAY SUSPENDED.
ANTI-TIP / WALL ANCHORING HARDWARE INSTALLATION:
Ltr.
Qty.
Hardware Included
A
2
Screw
B
2
Bracket
C
2
Retention Belt
1. Locate and mark a Wall Stud behind mirror at location for installation.
2. Wall Stud must line up with at least one Keyhole Bracket on back of mirror.
3. Using screwdriver, attach Bracket (B) by driving Screw (A) through hole an into WALL STUD.
4. Move mirror into place, align Brackets then connect both using Retention Belt (C).
5. Confirm Belt is securely laced and locked.
WARNING
Tip-Over Hazard
WALL BRACKET MUST BE ATTACHED TO WALL STUD
Prevent tipping accidents. Anchor your mirror.
(B)
(A)
(C)
Wall
Cleaning & Care:
DO NOT use alcohol based products or spray polisher as finish damage may result.
Dust with a soft cloth.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Page 5 of 5
