EXPANSION BOLT (For use in open drywall where no wall stud is present)
STEP 2: If mark falls in area in with no wall stud, use Drill with 3/8” bit to create a hole through
drywall. Use hammer to lightly tap Expansion Bolt (B) into hole until teeth sink into wall surface.
STEP 2: Using a screwdriver, firmly press down and turn Bolt clockwise until it starts to slip which
indicates barrel has crimped against inside of wall. Back Bolt out just enough to permit Keyhole
bracket to slip over and mirror to be hung.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Page 4 of 5
