(B)
(A)
(C)
(C)
(D)
Ltr.
A
2
Small Screw
Retention Belt
Qty.
Hardware Included
B
2
Large Screw
C
4
Bracket
D
2
ANCHORING HARDWARE (ANTI-TIP)
1. Locate and mark a Wall Stud behind Desk at location for installation.
2. Corresponding to Stud location, attach one Bracket (C) to back of Desk using Small Screw (B).
3. To keep hardware out of view after installation, attach remaining Bracket (C)
INTO WALL STUD
with Large Screw (A) 2 inches below Bracket attached to back of console.
4. Move Console into place, align Brackets then connect both using Retention Belt (D).
5. Confirm Belt is securely laced and locked.
WALL BRACKET MUST BE ATTACHED TO WALL STUD
Page 6 of 6
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
WALL
STUD
Serious or fatal crushing injuries can occur from a furniture tip-over
Tip-Over Hazard
Prevent tipping accidents. Anchor your furniture.
WARNING
