E
A
C
D
Page 3 of 6
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
STEP 1: Orient Left Frame (I) and Right Frame (H) as illustrated with Connector Tabs on edge near floor
then attach Front Frame Connector (K) to each side using Small Allen Bolt (A) with Lock Washer (D) and
Flat Washer (D). Fully tighten using Allen Wrench (E).
Connector Tabs
(I)
(H)
(K)
STEP 2: Orient Back Frame (J) as illustrated with Connector Tabs on top edge, opposite Legs. Attach to
tabs at top and bottom using Small Allen Bolts (A) with Lock Washer (C) and Flat Washer (D). Use Large
Allen Bolts (B) with Lock Washer (C) and Flat Washer (D) to further secure Back Frame to both Left and
Right Frames. Fully tighten all Bolts using Allen Wrench (E).
E
A
C
D
E B
C D
(J)
Connector Tabs
Assemble in location for intended use.
