Page 3 of 5
STEP 1:
Console (I) is equipped with removable Base Moulding (G). On a soft, padded surface gently
lay Console backside down. Orient base molding with square edge to back and insert Bolts (D) through
pre-drilled holes and into T-nut in Base Molding. Use a screwdriver to firmly tighten.
Install Bolts through
cabinet from inside base
(D)
STEP 2
: Console (I) is equipped with Levelers under each corner which are accessible from the
bottom INSIDE of Console. If necessary, insert Leveler Tool (E) into opening in corner(s) and turn
clockwise/counterclockwise to adjust.
Leveler accessible from inside
Console.
(I)
(E)
NOTE: If attaching Bookcase(s) or Cabinet(s) SKIP THIS STEP.
Assemble in location for intended use.
NOTE: When attaching muliple units together, level each before joining with brackets.
(G)
(I)
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
