STEP 4:
Page 4 of 4
STEP 3: Carefully flip Base (F) and align outer holes on Bridge with Holes on Table Top (E). Secure
using Bolts, Lock Washers, and Flat Washers collected in Step 1. Tighten using Wrench (D)
then carefully flip Table upright.
Note: Make sure all Bolts are fully tightened before turning Table upright.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
(D)
(E)
(F)
(F)
Bridge
LEVELERS Base is equipped with Rotary Levelers located under each corner.
If necessary, Table may be adjusted by carefully raising applicable corner and turning Leveler
clockwise/counterclockwise.
Cleaning and Care
Avoid harsh or abrasive chemicals as finish damage may result.
Use coasters, trivets, place mats to protect surfaces. Promply remove spills.
Dust with a soft, dry cloth.