Align holes on the Bridge with hole in Base (F). Secure using Hexagonal Bolts (A), Lock
Washers (B), and Flat Washers (C). Fully tighten using Wrench (D).
STEP 2:
(E)
Page 3 of 4
STEP 1: Lay Table Top (E) upside down on a smooth, clean surface.
Remove pre-attached Bridge by unscrewing Bolts, Lock Washers, and Flat Washers
with Wrench (D).
RETAIN Bolts for STEP 3.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
(D)
Bridge
(A)
(B)
(C)
(D)
(F)
Bridge