Balkene Home SIENA 64016, Руководство пользователя

Страница: 5 / 13

”Á>UÁ¿É¸¿t”µ¿>¸¸ƒ¸Á>Ug[¿¿£l½½¤¿‘lu‚¼l¼¼¿¿N¿¿ÑÑѦ
L>Š‰gg”g¦U”
¿ ¿¿¿¿ 5
ASSEMBLY
1
Insert Cam Bolts 1 into the 2 indicated holes in
the Bottom Face Frame G . Use a Phillips-head
screwdriver to tighten the threads into the
panels.
Hardware Required:
1
Cam Bolt x3
Insert Dowels 3 into the 2 remaining holes
in the Bottom Face Frame G .
Insert the hardware in the Bottom Face Frame
into the corresponding holes in the edge of the
Base Panel
F as shown. Secure by inserting a
Cam Nut 2 into each of the adjoining holes in
the underside of the Base Panel. (HINT: the
small arrow on the flat side of the Cam Nut
should point toward the adjoining panel.)
Use a Phillips-head screwdriver to turn the
Cam Nuts clockwise to secure the Cam Bolts.
Hardware Required:
2
Cam Nut x3
3
Dowel x2
Install the Support Leg J on the bottom of the
Bottom Panel F using a Screw ? as shown.
Apply a Foot Pad ? to the bottom of the
Support Leg. Press firmly to adhere.
Hardware Required:
? Screw (5x40mm) x1
?
Foot Pad x1
3
F
3
2
2
J
F
1
G
3
G
→
→
2
ASSEMBLY NOTE: Use a Phillips-
head screwdriver to tighten each
Cam Bolt you install until its
threads are fully inserted.