background image

”Á>UÁ¿É¸¿t”µ¿>¸¸ƒ¸Á>Ug[¿¿£l½½¤¿‘lu‚¼l¼¼¿¿N¿¿ÑÑѦ

L>Š‰gg”g¦U”

¿

¿¿¿¿¿¿Ç

INFORMATION

BEFORE YOU BEGIN

Before beginning assembly, make sure all parts are present. Compare parts 
received with the "Parts List." If any part is missing or damaged, do NOT attempt 
to assemble the product. Please read and understand this entire manual before 
attempting to assemble this product. If you have any questions regarding the 
product, please contact Customer Service.

GENERAL INFORMATION

This product is made of particle board and MDF. For safe assembly, work on a 
dry, soft, secure, and clean surface. Do not clean with detergents or chemicals. 
Do not sit or stand on the unit. Do not place damp or hot items such as coffee 
cups directly on the surface of this item. Keep away from direct sunlight and 
water. Do not drag the unit. For indoor use only.

SAFETY INFORMATION

WARNING
DO NOT sit or stand, or allow children to sit or stand on the assembled product. 
Make sure connectors are securely in place. Perform periodic checks to ensure 
the connectors remain secure and adjust if needed. Keep unassembled parts and 
hardware away from children and infants. This package contains small parts and 
sharp edges. Adult assembly required.

CAUTION
READ all instructions before beginning assembly. Failure to do so may result in 
faulty assembly and potential injury. Assemble the item on a soft, nonabrasive 
surface such as carpet or cardboard to avoid damaging the item.

Max safe load limit:
Top: 

20

 KG / 

44

 LB

Open Shel

f

:

 

8

 KG / 

17.5

 LB

 

Drawer: 5 KG / 11 LB

Side compartments: 8 KG/ 17.5 LB

Call toll-free  (866) 985-7877 

9 am – 9 pm, EST

Email  
Live Chat 

[email protected] 
www.balkenehome.com 

9 am – 6 pm, EST, Monday – Friday

Содержание SIENA 64016














Отзывы: