Á>UÁ¿É¸¿tµ¿>¸¸¸Á>Ug[¿¿£l½½¤¿lu¼l¼¼¿¿N¿¿ÑÑѦ
L>ggg¦U
¿
5
ASSEMBLY
1
1
x2
F
Insert Cam Bolts
1
into the indicated holes in
each Bottom Face Frame
F
. Use a Phillips-head
screwdriver to tighten the threads into the
panels.
Hardware Required:
1
Cam Bolt x4
Insert Dowels
3
into the 2 remaining holes
in each Bottom Face Frame
F
.
Insert the hardware in the Bottom Face
Frames into the corresponding holes in the
edges of the Bottom Panel
E
as shown. Secure
by inserting a Cam Nut
2
into each
of the adjoining holes in the underside of
the Bottom Shelf. (HINT: the small arrow on
the flat side of the Cam Nut should point
toward the adjoining panel.)Use a Phillips-
head screwdriver to turn the Cam Nuts
clockwise to secure the Cam Bolts.
Hardware Required:
2
Ca
m N
ut x4
3
Dowel x4
F
F
F
3
3
2
→
→
2
ASSEMBLY NOTE: Use a Phillips-
head screwdriver to tighten each
Cam Bolt you install until its
threads are fully inserted.
E
J
Install the Support Leg
J
on the bottom of the
Bottom Panel
E
using a Screw
?
as shown.
Apply a Foot Pad
?
to the bottom of the
Support Leg. Press firmly to adhere.
Hardware Required:
?
Screw (5x40mm) x1
?
Foot Pad x1
2
E
