ASSEMBLY
Hardware Used:
5
Screw 4x50mm
x
2
?
Wall Anchor
x
2
Check that all hardware connections
are securely installed.
Anchor the unit to the wall for safety.
The included hardware is appropriate
for drywall installation and may
require the use of a drill. If needed,
consult a qualified tradesperson or
online resources for the appropriate
steps to safely anchor this unit.
Position the unit temporarily in the
desired location. Locate the eyelets
drilled through the
Top Rear Shelf
Support
G
. Mark the 2 points where
the eyelets align on the wall and move
the unit aside. Use a power drill with a
6mm or 1/4" bit to drill 2 holes as
marked. Insert the
Wall Anchors
?
into the drilled holes and gently tap
with a mallet until almost flush with
the wall surface.
Move the unit back into place and line
up the holes in the
Top Rear Shelf
Support
with the
Wall Anchors
. Insert
a
Screw
5
through each eyelet and
tighten securely into the
Anchors
.
23
a
b
c
d
A
5
5
5
Your
Greenwich Storage Shelf
is ready for use!
Contact us for assistance: (866) 985-7877 | www.balkenehome.com
11
