Step 5
Fig. 5
Attach the right panel (8) to the 2 support legs (9 and 16) with
4 M6x20 bolt assemblies (AA).
Make sure the control panel on the control panel assembly (4)
fits the position on the right panel (8).
Do not fully tighten the hardware until the entire step is
completed.
ASSEMBLY INSTRUCTIONS
AA
Thermocouple
Electrode
wire
Grounding
wire
DD
8
8
8
4
16
Hardware Used
AA M6x20 Bolt Assembly 4 pcs
9
Step 6
Fig. 6
Attach the control panel assembly (4) to the right panel (8)
with 2 pcs M4x10 bolts (DD).
Attach the grounding wire to the control panel assembly (4)
and the right panel (8) with 1 pc M4x10 bolt (DD).
Connect the thermocouple to the valve and insert the
electrode wire into the igniter under the control panel tightly.
Hardware Used
DD M4x10 Bolt 3 pcs
10
