12
13
Adjusting Your Shade’s Limits and Home Position
Adjusting Your Shade’s Limits and Home Position
1. On the remote, press and hold the
MENU/RIGHT button for 2 seconds to
enter the menu.
2. Select SHADE > LIMITS.
3. To proceed past the warning message,
press and hold the MENU/RIGHT button
for 2 seconds.
Adjusting the Lower Limit
For the Single-Channel Remote
Before You Start
Don’t attempt to move the lower limit to a position lower
than the preset limit—that could damage your shade.
If your remote currently controls a group of shades, you’ll first need
to target the specific shade that you want to adjust the lower limit
for. To do that, perform the following steps:
1. On the remote, press and release the program button
on the back.
The remote LED will flash green.
2. On the shade you want to adjust, press and hold the program
button for 3 seconds.
The shade LED will flash green and the shade will jog.
Even after you target a shade, all of the shades in the group
will still move with the remote. However, nontargeted shades won’t
accept the new lower limit until you target them specifically.
4. Scroll left and right to select the shade
you want to adjust the upper limit for.
5. With UPPER selected, press and hold the
MENU/RIGHT button for 2 seconds.
If the shade isn’t already at the current upper limit,
it will move to that position. If the shade is already
at the current upper limit, it will jog.
6. Use the UP or DOWN buttons to move
your shade to the new upper limit.
7. Press and release the MENU/RIGHT
button to set the upper limit.
The shade will jog. This means you’ve set
your new upper limit.
TARGET
SHADE
Adjusting the Upper Limit
For the Multi-Channel Remote
You must reset the home position if adjustments are made.
See “Setting a Home Position” on pages 16 & 17.
