balfor SHARK Series Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 59

balfor SHARK Series Скачать руководство пользователя страница 29

Use and maintenance manual

Circular saw

SHARK

28

2.2.4

Conveyor belt models

In addition to what is specified in sec.

2.2.1

:



Check the wear and tear condition of the hydraulic hoses. In the event of deterioration (or at least

every 6 years) replace them.



When the machine is not attached to the power unit, the hydraulic hoses must be placed on the

appropriate supports.



Ensure that the hydraulic hoses are correctly engaged, following the colour recognition code.

Remember: their inversion causes movements opposite to those commanded.

ATTENTION!
Do not, under any circumstances, stand between the tractor and the machine

with the engine running and the power take-off engaged.

ATTENTION!
Do not stand or walk under the conveyor belt during machine operation, danger of

falling logs.
Keep your distance.

All Shark models, in all versions, are equipped with an emergency brake that

acts by slowing the blade until it stops.
This device is activated:

for

C and SB models by pressing the red lever in front of the operator;

for

EM and ET models by pressing the red button on the electric switch.

«
...
27
28
29
30
31
...
»

Содержание SHARK Series




























































Отзывы:

Нет отзывов