Cleaning
Damage to the device!
►
To avoid irreparable damage, ensure that no moisture penetrates the device during cleaning.
■ Clean the surfaces of the device with a soft, dry cloth. Use a normal commercial detergent and water to
remove stubborn residue. Ensure that no water gets into the device.
■ Always keep the seal between the camera housing and the
tree mounting clean so that no moisture gets into the device
and damages it. Contamination of the seal can impair the dust
and water spray protection .
■ Always keep the base plate seal that protects the connection
socket for the mains adapter clean.
■ Clean the seal regularly with a little Vaseline to keep it malleable. This is the only way to ensure that the
interior of the device is adequately protected from moisture.
Handling and operation
In this chapter you will receive important information for the handling and operation of the device.
Switching on and off , making settings
After connecting a power supply, move the operating mode selector switch to the“TEST”position to
make the settings described on the following pages using the remote control panel buttons (photo as
follows). In test mode, the infrared lamp is closed.
Press the
key to choose the upper option.
Press the key to choose the next option.
Press the
SHOT key to manually trigger the shutter. A photo or video (depending on the camera
setting) will be taken and saved to the SD card.
Press
OK
key to save the menu setting
Press
Mode
key to swift photo mode and video mode; review or replay the photo or video; swift the
number, letter, symbol when setting up MMS.
