Press the up/down buttons to set the hour for the start of the active phase. Then switch to the next field
using the right button. Press the up /down buttons to set the minutes for the start of the active phase.
The settings made here apply every day. The camera will not record any images outside of the active
phase.
Confirm your selection with the OK button. Afterwards, press the MENU button to close this sub-menu.
12.Password Setting
Select “On”if you want to use a password to protect the camera from unwanted access. In the following
screen menu, you can set a 4-digit combination:
Press the up /down buttons to select the first digit between 0–9.
Then switch to the next field using the right button. Press the up /down buttons to select the second digit
between 0–9.Confirm your selection with the OK button. Afterwards, press the MENU button to close this
sub-menu.The set number combination must now be entered each time the camera is switched on in SET
mode before the unit can be operated.If you forget the number combination, please ask the supplier for
firmware to reset it to its factory default settings.
13.Serial No
Select“On”if you want to use a serial number to rank the camera. In the following screen menu, you can
set a 4-digit combination:
Press the up /down buttons to select the first digit between 0–9.
Then switch to the next field using the right button. Press the up /down buttons to select the second digit
between 0–9.
