2 13/16"
1 19/32"
1 19/32"
C or D
G
C or D
NOTE:(A) 4 G HOLES
ARE FOR HEAVY DUTY SERIES USE.
(B) C & C or D & D
ARE FOR STANDARD SERIES USE.
NOTE:(A) 4 G HOLES ARE FOR HEAVY DUTY SERIES USE.
(B) C & C or D & D ARE FOR STANDARD SERIES USE.
2 7/32"
G
2 7/32"
For HEAVY DUTY
G holes.
For STANDARD
4. FOR HEAVY DUTY SERIES SCREW
THRU BO
LTS IN
T
O (4) G HOLES & FOR STANDARD SERIES SCREW
THRU BO
LTS IN
TO EITHER C&C FOR LHR OR D&D FOR RHR
AND
TIGHTEN.
5. IF CYLINDER IS REQUIRED, INS
TAL
L CYLINDER IN
TO CYLINDER HOLE WITH CYLINDER COLLAR
AND SECURE WITH CYLINDER RE
TAINING RING.
7. PROCEED WITH
TEMPL
ATING DOOR
AS SHOWN IN FIG 7
AND FIG 9 FOR EITHER
HEAVY DUTY
OR STANDARD SERIES.
2 13/16"
2 5/32”
2 5/32”
2 5/32”
2 5/32”
2 15/16"
2 15/16"
9 3/32"
2 15/16"
9 3/32"
2 7/16"
9/16"
3/4”
