Baldwin Boxall Vigil 3, Руководство по установке

Страница: 11 / 20

Vigil 3 Amplifiers
Installation Instructions
Vigil 3 Amplifier Installation Manual issue 1
5
2 Installation Examples
The Vigil 3 Amplifiers have been designed for quick and simple
connection and configuration.
The individual amplifier blocks can either be used as independent
amplifiers, can be one of two amplifiers wired as an A-B Dual
Circuit using a single input signal, or the 300W amplifiers can be
paralleled with other 300W Vigil 3 Amplifiers to enable higher
power outputs (up to a maximum of 4 Vigil 3 300W amplifiers
giving a total of 1200W).
The amplifier blocks have two paralleled input connectors to
enable simple interconnection using standard RJ45 patch leads.
The 100V Line output connectors are “cage clamp” type as this
type of connector is more reliable than screw terminals.
N
OTE
: Where possible when A-B circuits are used it is recommended that
A and B circuits are connected to amplifiers in serperate modules. This is
due to power supplies, mains connections and battery connections being
shared by amplifiers inside a module.
N
OTE
: Where possible when reserve amplifiers are used it is recommended
that reserve amplifiers should be located in a different amplifier module
to the primary amplifier. This is due to power supplies, mains connections
and battery connections being shared by amplifiers inside a module.