BALDR B0367WST2H2R-V1, Руководство пользователя

Страница: 8 / 96

Main Unit Instrallation
Sensor Instrallation
Sensor Setup
Power Supply
8
Power the main unit prior to load the battery of sensor
●
Switch the Channel 1-2-3 of the senor to any channel you want.-
For example, you can set to Channel 1 for the sensor. But please
ensure the main unit are set to the same channel before synchro-
nization. (Special note: Press. “CH/▲” button on the main unit to
set the channel.The setting order is CH1--CH2--CH3--Channel
scan
（
from CH1 to CH2 to CH3,10 seconds intervals
）
,you must
select the same number choices for both the sensor and the main
unit in order to synchronize)
●
Connect the power adaptor with DC hole on back of the unit and
plug the adaptor to a powered outlet
1. Remove the battery compartment cover
2. Insert 2xAA batteries matching the polarity
（
+and-)
3. Replace the battery cover
EN
BALDR recommends high quality alkaline or lithium
batteries for the best product performance. Heavy
duty or rechargeable batteries are not recommended.
GETTING STARTED
1xUser Manual
1xRemote Sensor
1xAc Adaptor
1xCR2032 Cell battery