BALDR B0367WST2H2R-V1, Руководство пользователя

Страница: 14 / 96

Placement Instruction
Main Unit Placement
Press and hold the button to reverse the projection data with 90
degree from 0°→90°→180°→270°→0°
.
●
Slide the “focus” switch on the back of unit to adjust the focus of
projection.
●
Press “ ”button to turn on the backlight.
●
Press “ ” button to switch backlight brightness among 100%,
50% and off
●
BACKLIGHT FUNCTION
BALDR sensors are sensitive to surrounding environmental condi-
tions. Proper placement of both the main unit and outdoor sensor
are critical to the accuracy and performance of this product.
Place main unit in a dry area free of dirt and dust. To help ensure
an accurate indoor temperature measurement, be sure to place the
main unit away from heat sources or vents.
14
Outdoor Sensor Placement
Sensor must be placed outside to observe outdoor conditions.Sen-
sor is water resistant for water splashes and is designed for general
EN
OR when alarm is ringing, press “ ” button to activate
snooze function. And the alarm will repeat in each 5 minutes. The
“ ” symbol will be flashing on screen to indicate the snooze
mode.Press any other button except top button to exit the snooze
mode.And the alarm will restart next day.
2.
When alarm rings, the ascending “Bibi” alarm sound will last for 2
minutes if no operation.
3.
Slide the switch on the back of unit to turn on/off projection.
●
Press the button to turn on/off the projection.
●
PROJECTION FUNCTION