5
●
Up to 3 RF channels for outdoor sensors (only one sensor included)
●
White backlight lasts for 20 seconds
●
Stable and storable mental stand
PACKAGE CONTENT
Following contents are included in the package:
1 x Weather Station Main Unit
1 x Remote Sensor
1 x User Manual
1. Remove the battery compartment cover;
2. Insert 3 x AAA battery matching the poand-) ;
3. Take the metal stand out of the compartment and install it on the
back of the unit.
GETTING START
MAIN UNIT INSTALLATION
SENSOR INSTALLATION
1. Remove the battery compartment cover;
2. Insert 2 x AA batteries in each sensor matching the polarity (+and-);
3. Replace the battery cover.
SENSOR SETUP
BALDR recommends high quality alkaline or lithium batteries for
the best product performance. Heavy duty or rechargeable
batteries are not recommended.
Switch the Channel 1-2-3 of the senor to any channel you want.
For example, you can set to Channel 1 for the sensor. But please
ensure the main unit are set to the same channel before synchro-
nization. Special note: Press “ CH/
▲
” button on the main unit to
set the channel. The setting order is CH1--CH2--CH3-- Channel
scan(from CH1 to CH2 to CH3, 10 seconds intervals),you must
select the same number choices for both the sensor and the
main unit in order to synchronize.
●
Power the main unit prior to load the battery of sensor.
