10
TEMPERATURE
After power on ,the indoor temperature will display automatically,
it will update reading each 30 seconds and start to receive
outdoor signal which lasts for max 3 minutes.
1.
Accuracy: For temperature between 0
℃
~50
℃
,the accuracy is
±1
℃
,if out of this range the accuracy will be ±2
℃
; Temperature
resolution is 0.1
℃
(0.1
℉
).
5.
Press “ RCC/SET ” button to select the temperature unit
℃
/
℉
(Refer to Manual Settings point 10).
6.
HUMIDITY
After power on ,the indoor humidity will display automatically, it
will update reading each 30 seconds and start to receive out-
door signal which lasts for max 3 minutes.
1.
Humidity display range: 1%-99%;for humidity lower than 1%,the
reading will be “1%”;for humidity higher than 99%,the reading
will be “99%”.
2.
Indoor temperature display range:-10
℃
~ 50.0
℃
(14
℉
~ 122
℉
);
for temperature lower than -10
℃
,the reading will be :“LL.L”; for
temperature higher than +50
℃
,the reading will be :“HH.H”.
2.
Outdoor temperature display range :-40
℃
~60
℃
(-40
℉
~140
℉
);
for temperature lower than -40
℃
,the reading will be :“LL.L”; for
temperature higher than +60
℃
,the reading will be :“HH.H”.
3.
Arrow indication for temperature changes:
will display when the reading increase by 1
℃
within one hour
or compared with last reading.
will display when the reading decrease by 1
℃
within one
hour or compared with last reading.
4.
The checking order is : Max Record
→
Min Record
→
Exit. The
value will display for 3 seconds.
2.
Press and hold the “ MEM/
▼
” button to clear the max and min
record.
3.
Normally, the Max and Min record will update every 24 hours at
0:00.
4.
If no operation for 3 seconds, it will automatically exit .
5.
