Baldan ASDA, Инструкция по эксплуатации

Страница: 31 / 46

Instruction Manual
29 -
ASDA
BEARINGS ADJUSTMENTS
Figure 23
• When the bearings submit clearances, adjust them as follows:
07 - Loosen the screws (1);
08 - Remove the joint (3), the bearing cover and replace it again.
09 - If the gap persists, it can be facemills the cover (2) to increase the tuning
then mount the same on the bearing with many joints as required.
10 - The bearing must rotate freely, ie without axial or radial clearances.
11 - Grease the bearing again. The amount of grease used is 150 grams.