4
PRODUCT DESCRIPTION
The “Bobcat 130” pump family replaces the earlier
“Trans-Jet 130”, “131A-CB & 131A-CBL”, “121”,
“Econo-Jet” ™ (1.5:1) and P-160/P-161 food
pumps. These pumps are suitable for petroleum
products, chemicals, and USDA applications.
Four versions are currently available, two each
in stub and drum lengths. The 1110-001 and
1110-003 are composed of carbon steel parts
with Buna-N seals for long life.
The 1160-002 and 1160-003 have all “wetted
parts” made from 304 SS or 316 SS and Viton
and are USDA approved.
All pumps contain a pair of 1 inch Delrin ® balls
which provide compatibility for many fluids and
a smooth flow on both pump strokes. For fluids
more viscous than 90W gear lube, carbon steel or
300-series SS balls may be substituted.
All pumps are composed of a 2-piece body with
the upper section being Aluminum and the lower
section being Aluminum or 316 SS, depending
on model number.
The lower section’s flanged coupling contains an
4-hole bolt pattern which allows 360° rotation of
the inlet and outlet ports in 90° degree increments.
This feature is useful when installing a pump
on a wall bracket that limits orientation of the
hoses.
All pumps contain a pair of internal exhaust
mufflers which provide efficient operation with
low noise levels conforming to OSHA regulations.
These mufflers also act as filters, inhibiting air
line debris from exiting the pump where cleaner
environments are required.
The 1 -piece pumpair motor is factory-lubricated
with a life-tested, synthetic grease (Balcrank
#826733). This grease coats all internal parts and
repels air line moisture to inhibit corrosion. Steel
components exposed to air line moisture are
surface treated to inhibit corrosion.
NOTE: Delrin ® is a registered trademark of the
DuPont Company
DIMENSIONS &
MOUNTING DIAGRAM
Figure 2
Pump Dimensions
OVERALL LENGTH
MODEL
“A”
“B”
“C”
(Stub Length)
1110-001
26.2”
9.8”
8.2”
1160-002
26.2”
9.8”
8.2”
(Drum Length)
1110-003
50.4” 34.0” 32.4”
1160-003
50.4” 34.0” 32.4”
