Balcrank BOBCAT 130 Series Скачать руководство пользователя страница 9

9

Parts List

PUMP SERVICING

NOTE:

 Air  motor  is  lubricated  with  a  life  tested 

synthetic  grease  (Balcrank

®

  P/N  826733)  at 

the  factory.  This  grease  coats  all  parts  and 

repels  air  line  moisture  to  inhibit  corrosion.  It 

is  imperative  that  any  grease  removed  during 

routine  maintenance  be  replaced.  Contact  your 

local Balcrank

®

 Distributor, using the above part 

number, for replacement grease.

NOTE:

 The  following  steps  and  item  numbers 

pertain to the stub pumps. Except for a few fluid 

section components (pump tube, pump rod, fluid 

piston,  etc.),  stub  and  drum  pumps  are  alike. 

When repairing a drum pump, pay close attention 

to  different  parts  that  may  carry  the  same  item 

number as their stub counterparts, such as the 

pump tube (35).

Repair  Kits: 

There  are  three  kits  available  to 

repair the stub and drum “Bobcat 130” pumps:

  * 827711 (air piston parts for all pumps)

  ** 828069 (fluid seals for carbon steel pumps)

  ***  828070  (fluid  seals  for  stainless  steel 

pumps).

11

10-001

1160-002

11

10-004

1160-006

 

PRESSURE RELIEF    

 

PROCEDURE:

 

Follow  this  procedure 

 

whenever you shut off the 

pump, when checking or servicing any part of 

the  system  and  when  installing,  cleaning  or 

changing any part of the system.

1 )  Disconnect the air to the pump.

2)   Point dispensing valve away from

 

yourself and others.

3)   Open dispensing valve until

 

pressure is relieved.

WARNING

!

 

ITEM  PART #  DESCRIPTION 

  1 

827710  Air Valve Assembly 

1  1  1  1

  2 

826658  Upper pump rod 

1  1  1  1

  3 

805723  Crimp Nut 

1  1  1  1

  4 

805756  Washer 

1  1  1  1

  5 

826052  Adapter 

1  1  1  1

  6 

826680  Rod 

1  1  1  1

  7 

827414  Lower Pump Rod (Alum.)  1    1

   

827415  Lower Pump Rod (316SS)    1    1

  8  820015  O-Ring, Buna-N, -120** 

1    1

   

827441  O-Ring, Viton, -120*** 

  1    1

  9 

 

Not Used

  10 

 

Not Used

  11 

 

Not Used

  12 

 

Not Used

  13 

 

Not Used

  14  827168  1” Ball (Delrin)** *** 

2  2  2  2

  15  827422  Fluid Piston (Alum.) 

1    1

   

828988  Fluid Piston (316SS) 

  1    1

  16  816853  O-Ring, Buna-N, -223** 

1    1

   

827065  Quad-Ring, Viton, -325***    1    1

  17  826660  Cap (Alum.) 

1  1  1  1

  18  828529  Flat Gasket* 

2  2  2  2 

  19  826663  Spring* 

1  1  1  1

  20  826664  Spring Retainer 

1  1  1  1

  21  826665  Screw, 1/4-20 x 1/2” 

1  1  1  1

  22  827727  Air Piston Tube (STL) 

1  1  1  1

  23  808439  Spring* 

1  1  1  1

  24  807342  O-Ring, Buna-N, -222* 

1  1  1  1

  25  827780  Upper Body (Alum.) 

1  1  1  1

  26  827767  Muffler Screen (Brass) 

2  2  2  2

  27  827766  Muffler Foam** *** 

2  2  2  2

  28  827426  Retaining Ring 

1  1  1  1

  29  827425  Backup Ring (Brass) 

1  1  1  1

  30  826071  Wiper Seal, Buna-N** 

1    1

   

826072  Wiper Seal, Viton*** 

  1    1

  31  828365  Lower Body (Alum.) 

1    1

   

828366  Lower Body (316SS) 

  1    1

  32  829002  Lock Washer (STL) 

4  4  4  4

  33  829001  Screw, 1/4-20 x 3/4” 

4  4  4  4

  34  826678  O-Ring, Buns-N, -132** 

1    1

   

826679  O-Ring, Viton-132*** 

  1    1

  35  828361  Pump Tube, (STL), 6.8” 

1

   

831205  Pump Tube, (316SS), 6.8”    1

   

828362  Pump Tube, (STL), 31” 

 

  1

   

831206  Pump Tube, (316SS), 31”   

 

  1

  36  826678  O-Ring, Buna-N, -133** 

1    1

   

826679  O-Ring, Viton, -132*** 

  1    1

  37  826060  Footvalve, (STL) 

1    1

   

829027  Footvalve, (316SS) 

  1    1

  38  827427  Retaining Pin (316SS)** *** 

   

 

(prior to 6/03 on carbon pumps) 

1  1  1  1

   

829769  Retaining Pin** 

   

 

(after 6/03 on carbon pumps) 

1  1  1  1

  39  831489  Grounding Lug (not shown) 1  1  1  1

Содержание BOBCAT 130 Series













Отзывы: