BALCO HE180021, Инструкция по эксплуатации

Страница: 25 / 40

25
.
AFTER SALES SUPPORT
CUSTOMERCARE@BALCOLIFESTYLE.COM MODEL: HE180021
SETUP
3.3.2 Inserting Filament
1. On the Main Screen, select Quick Menu Change Filament Add Filament
2. Select the desired type of Filament to be added. The Extruder will automatically be raised
and your Printer will begin heating the Extruder to the correct temperature. When the
temperatures are within a few degrees of the target, you are ready to insert the filament
3. Place the included filament onto the Spool holder. Carefully insert the end of the filament into
the hole on the Extruder. The Extruder will begin to slowly pull the filament in. Once filament
begins extruding, press Back to stop
4. Carefully remove the extruded filament from the Nozzle Head and ensure the Print Bed is
clean
WARNING:
Extruder and Heated Print Bed will still be hot
3.3.3 Removing Filament
1. On the Main Screen, select Quick Menu
Change Filament Remove Filament
2. Select the desired type of Filament to be removed. The Extruder will automatically be raised
and your Printer will begin heating the Extruder to the correct temperature
3. Once the Extruder reaches the correct temperature, the filament will begin retracting from
the Extruder. Gently pull the filament up until it is released and press Back to stop
NOTE: Trim of the end of the retracted filament prior to reinserting into the Extruder to prevent
clogging the Printer Nozzle.
3.3.4 Storage
Both PLA and ABS filaments are sensitive to moisture. If stored in a humid environment, the quality
of the filament can deteriorate, with a tendency to bubble and spurt from the nozzle tip. This will
affect print quality, so when storing PLA or ABS for an extended period of time, follow these tips.
• Store in a sealed, air tight bag/container. We recommend a vacuum seal bag
• Store with a silica gel (moisture absorber) pack. One is included with each filament spool