BALCO DY200223, Инструкция по эксплуатации

Страница: 10 / 16

10
After Sales Support
1300 663 907
Model Number
DY200223
customercare@balcobrands.com
AUS
1. Find a suitable location to mount the power board. Use the included
wood screws
Note: Ensure the Workshop Power Station is being mounted close enough to
utilise a suitable power point
2. Measure holes for 4 wood screws using a spirit level, with 100mm
spacing. Alternatively, use the provided mounting template. Fit the
supplied wood screws
Note:
Mounting the powerboard onto plaster or masonry may require
additional screws and components
3. Line up the mounting holes on the back of the power board and place
on to the screws. Gently push down
Mounting
Instructions