manualshive.com logo in svg

Balboa TP500, Руководство пользователя, Страница: 22 / 26

Поделиться
Скачать
Balboa TP500 Скачать руководство пользователя страница 22

42339 rev A1

03/06/20

22

Manufactured under one or more of these patents.  U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 

6965815, 7030343, 7,417,834 b2, Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending.   All 

material copyright of Balboa Water Group.

System-Related Messages

M E M

C L O K

F A I L

C N F G

F A I L

C A L L

  F O R

5 R V C

Memory Failure - Checksum Error* – MO22

At Power-Up, the system has failed the Program Checksum Test. This indicates a problem with the firmware (operation program) and 

requires a service call.

Memory Failure - Clock Error* – MO20 - Not Applicable on the BP1500

Contact your dealer or service organization.

GFCI Failure - System Could Not Test/Trip the GFCI – MO36

NORTH AMERICA ONLY.  May indicate an unsafe installation. Contact your dealer or service organization.

Configuration Error – Spa will not Start Up

Contact your dealer or service organization.

Memory Warning - Persistent Memory Reset* – MO21

Appears after any system setup change.  Contact your dealer or service organization if this message appears on more than one power-up, 

or if it appears after the system has been running normally for a period of time. 

* This message can be reset from the topside panel with any button press. 

Содержание TP500



























Отзывы:

Нет отзывов