manualshive.com logo in svg

Balboa spaTouch series, Руководство пользователя

Поделиться
Скачать
Balboa spaTouch series Скачать руководство пользователя страница 7

42281_A

11-19-15

6

Manufactured under one or more of these patents.  U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2, 

Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending.   All material copyright of Balboa Water Group.

The Spa Screen

All Equipment Access  

The Spa Screen shows all available equipment* to control. The display shows icons that are related to the equipment  
installed on a particular spa model, so this screen may change depending on the installation. 
The icon buttons are used to select and control individual devices. 
Some devices, like pumps, may have more than one ON state, so the icon will change to reflect the state of the  
equipment. Below are some examples of 2-speed Pump indicators.

Jets High

Jets Low

Jets Off

If the Spa has a Circ Pump, a Circ Pump Icon will appear to indicate its activity, but outside of Priming Mode,  
the Circ Pump cannot be controlled directly.

*One exception: The Main Spa Light is not shown on the Spa Screen; it is only shown (and controlled) on the Main Screen.

Содержание spaTouch series






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды