manualshive.com logo in svg

Balboa spaTouch series, Руководство пользователя

Поделиться
Скачать
Balboa spaTouch series Скачать руководство пользователя страница 28

42281_A

11-19-15

27

Manufactured under one or more of these patents.  U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2, 

Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending.   All material copyright of Balboa Water Group.

Sensor-Related Messages

Miscellaneous Messages

Sensors are out of sync – M015**

The temperature sensors MAY be out of sync by 3°F. Call for Service if this message does not disappear within a few minutes.

Sensors are out of sync -- Call for service* – M026**

The temperature sensors ARE out of sync. The fault above has been established for at least 1 hour.  
Call for Service.

Sensor A Fault, Senor B Fault – Sensor A: M031**, Sensor B: M032**

A temperature sensor or sensor circuit has failed. Call for Service.

Communications error

The control panel is not receiving communication from the System. Call for Service.

Test software installed

The Control System is operating with test software. Call for Service.

**M0XX is a Message Code. Codes like this will be seen in the Fault Log 

* 

Some messages can be reset from the panel.

 Messages that can 

be reset will appear with a Clear Icon at the bottom of the Message 
Screen. Press the Clear Icon text to reset the message.

Содержание spaTouch series






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды