Revolution
Transforming the Control of Hot Tubs
15
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,
834 b2, Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
Firmly attach mounting holes on each
side of the system box with the screws
and washers provided.
When Mounting the System
The design and technology behind the Revolution allows it to be used in most
any application, and can be mounted on the suction side or discharge side of
the pump.
TIP
To improve reliability, take steps to minimize vibration from the pump(s) that
could be transmitted to the Revolution.
Use rubber isolation pads under the pumps and flexible PVC between the
t
filtration pump and the heater to help minimize vibration.
t
Mount the system with the heater horizontal and as low as possible in the
equipment compartment.
To avoid any potential for water to drip directly on the system, do not mount
t
the system directly under the control panel mounting location. Allow a drip-
loop in the control panel wiring to keep any water that may travel down the
wire from wicking onto the system box.
Do not mount upside down.
t
