Balboa Instruments Dolphin, Руководство пользователя, Страница: 16 / 19

31 30
USING THE
LEARNING FEATURE
You can program the buttons to add functions that
are unique to your home entertainment devices
(e.g.,VCR Tracking Up or Down).
NOTE: Please have your original remote controls
handy before programming learning. Be sure to
press each key within 10 seconds of the previous
entry. If not, the remote control will exit the
programming mode.
Programming A Learning Key
1. Press and hold SET until the LED (red light)
blinks twice, then release SET.
2. Enter 9 - 7 - 5.The LED will blink twice.
3. Press a device key once (e.g., TV) to assign a
mode for learning.
4. Press an open learning key once (e.g., Jets) to
store a feature to be learned. The LED will blink
rapidly for 4 seconds. If the LED does not blink
rapidly, go back to step 1 and start again.
5. Place your original remote control (e.g., TV
remote control) head-to-head (about 2" apart)
from the Dolphin Remote Control.
6. On your original remote control, press and hold
the key feature to be learned until the LED on the
Dolphin Remote Control blinks twice. If the LED
does not blink twice, repeat steps 3 through 6.
7. To learn functions onto other learning keys,
repeat steps 3 through 6.
8. To lock in new feature(s) on the Dolphin
Remote Control, press and hold SET until the LED
blinks twice, then release SET.
9. To test a learned feature, press a device key
(e.g., TV) once where the learning mode was
assigned. Then press the learning key (e.g., Jets)
where the learned feature is stored.
Deleting Functions From The Learning Keys:
1. Press and hold SET until the LED (red light)
blinks twice, then release SET.
2. Enter 9 - 7 - 6. The LED will blink twice.
3. Press the device key once where the learned
feature is stored (e.g., TV).
4. Press the learning key (e.g., Jets) to be deleted
twice. The LED will blink twice after the second
press.
5. To clear additional functions stored on other
learning keys, repeat steps 1 through 4 (in this
section).
Original Remote
Point the original
remote toward the
LED bump that is
marked with a dot
in front of it.