BALAY 3VS300BA, Инструкция по эксплуатации

Страница: 17 / 28

en
17
Intensive drying
The final rinse uses a higher temperature
which improves the drying result.
The running time may increase slightly.
(Caution if utensils are delicate!)
Close the door.
Switch on ON/OFF switch
1
.
Press and hold down the Start button
4
.
Rotate programme selector
3
until
the “Check water supply” display
9
flashes.
Release button.
The “Check water supply” display
9
flashes.
Change the setting as follows:
By rotating the programme selector
3
, you can switch on intensive drying
(End display
10
is lit) or switch off
intensive drying (End display
10
is not
lit).
Press Start button
4
.
The setting is saved.
Maintenance and care
A regular inspection and maintenance of
your machine will help to prevent faults.
This saves time and prevents problems.
Overall condition
of the machine
Check spray arm for grease and
limescale deposits.
If you find such deposits:
Fill detergent dispenser with detergent.
Start the appliance without utensils in
the programme with the highest rinsing
temperature.
Clean the appliance with detergents/
appliance cleaners which are particularly
suitable for use with dishwashers.
Regularly clean door seal with a damp
cloth.
Never use a steam cleaner to clean your
dishwasher. The manufacturer is not liable
for any consequential damage.
Regularly wipe the front of the appliance
and fascia with a damp cloth; water and
a little washing up liquid are adequate.
Do not use sponges with a rough surface
or abrasive detergents, as these could
scratch the surfaces.
Stainless steel appliances: To prevent
corrosion, avoid using sponge cloths or
wash them out thoroughly several times
before using for the first time.
Warning
Never use other chlorinated household
detergents! Health hazard!
Salt and rinse-aid
Check the refill indicators
8
and
7
.
If required, refill salt and/or rinse-aid.