2. Slide a washer over a 6-32 screw and thread it into the hole
in the end of the knob post to secure the knob in place. See
Figure B.
3. Tighten with the 5/64” Allen wrench, and repeat on the other
side.
ATTACHING THE FRAME HANDLE
1. Insert the two large socket caps screws through the holes in
the handle and into the head-end of the frame. as shown (see
Figure C). Use the 3⁄16” Allen wrench to tighten the screws.
RAISING AND LOWERING THE SHOULDER RESTS
The IQ shoulder rests have two
positions: “in use” for exercising,
and “storage”.
1. For the “in use” position
remove the shoulder rest
locking pin. See Figure D.
Note: There is only one pin,
not one for each shoulder.
2. Rotate the shoulder rests up
from their storage position.
3. Slide them to the side and
under the metal tab. See
figures E and F.
4. Insert the shoulder rest locking pin.
5. To move them back into the storage position. Remove the
shoulder rest locking pin. Grasp the shoulder rests and slide
them to the side, out from under the metal tabs, and rotate
them back down into their storage position.
EXTENDING THE FRAME
1. Flip the frame lock levers on both sides of the frame open to
disengage the locks.
Figure B
Fender washer and screw
Figure C
Figure D
Locking pin
Figure E
Push here and
then slide the
bracket under
the metal tab.
(see Fig F)
Metal tab
Figure F
Re-install the
locking pin
Figure G
Closed (Locked)
Opened (Unlocked)
3
