Figure H
USING YOUR NEW COMBO CHAIR CACTUS 2.0 BRACKET:
USING YOUR NEW COMBO CHAIR CACTUS 2.0 BRACKET
WITH HIGH BACK:
Pull the spring hook by the attached nylon web up over the
desired height onto the horn. Continue to slide the hook back
down the horn so that the ring will fall into the groove in the
plastic backer. For proper alignment see Figure H.
Your chair is ready to use.
Hold the spring by the coil body, move it to the desired height
and place the ring onto the cactus horn. Ensure that if there is
a nylon webbing on the hook, the nylon web is at the bottom of
the hook. If the nylon webbing is on the back of the hook when
trying to install, the webbing may not fit between the wood and
plastic backer. Continue to slide the hook back down the horn so
that the ring will fall into the groove in the plastic backer, when
installed properly the ring will be straight up and down. Your chair
is ready to use.
NOTE:
DO NOT
use your chair if the nylon web is attached to the
hooks
DO NOT
use your chair if the spring ring is not in the
designed groove of the plastic back
5
