Figure D
Figure C
6. Place the pad on top of the frame and use the (4) removed
chair pad screws with washers, tighten the pad to the top of
the wooden frame.
Pull the spring hook by the attached nylon web up over the
desired height onto the horn. Continue to slide the hook back
down the horn so that the ring will fall into the groove in the
plastic backer. For proper alignment see Figure D.
Your chair is ready to use.
NOTE:
DO NOT
use your chair if the nylon web is attached to the
hooks
DO NOT
use your chair if the spring ring is not in the
designed groove of the plastic back
USING YOUR NEW EXO CHAIR CACTUS 2.0 BRACKET:
INSTALL EXO CHAIR CACTUS 2.0 BRACKET:
4. Remove the old cactus from your chair
5. Place the new Cactus 2.0 Bracket in the same orientation
as the removed bracket. Using the removed bracket screws,
secure the new bracket onto the wooden frame as shown in
Figure C.
2
