MAXIMUM / MINIMUM MEMORY
Press MEMORY button repeatedly to view the maximum & minimum values of temperature readings.
To clear the memory record, hold MEMORY button.
CLOCK & CALENDAR SETTING
Hold “SET/
“ button to enter clock setting mode. Using “
”or “
“ to adjust and “SET/
” to
confirm, the following values can be set in sequence:
12/24hr format > Hr > Min > Yr > D/M or M/D format > Month > Date > EXIT
HOME TIME, WORLD (ZONE) TIME
Hold “ZONE” to enter world (zone) time setting mode. Press “
“or “
“ to enter the desired hour
offset value from –12 to +12 hours. Press “ZONE” to confirm each setting.
Press “ZONE“ button to toggle between home (radio-controlled) time and world (zone) time. “ZONE”
icon appears when world (zone) time is selected
ALARM SETTING
Press “ALARM” to show Alarm1. Press again to show Alarm2 display mode.
“---“ appears when the selected alarm is disabled. Press “ALARM
” to enable/disable the alarm.
Alarm time will appear when the respective alarm is enabled.
In Clock mode, you may also press “ALARM
” repeatedly to enable/disable the alarm directly. Bell
icon
1 and (or)
2 will appear when the respective alarm is enabled.
To set the alarm, press “ALARM” to select Alarm 1 or 2. Hold “ALARM” to enter alarm setting mode.
Press “
”or “
” to set the value and press “ALARM“ to confirm each setting.
Alarm setting sequence: Hour -> Min -> Day of the week -> Exit
NOTE: Day of the week selection: Select day of the week for the alarm to activate weekly. Multiple
or single day of the week can be selected.
IMAGE PROJECTION
To project time image onto wall or ceiling, press “SNOOZE/LIGHT” button or select “CONTINUOUS
PROJECTION” to “ON” position.
Rotate the “FOCUS” knob to adjust the image focus.
Rotate the “IMAGE ROTATION” knob to adjust the orientation of the projected image
NOTE: Continuous projection function is only available when adapter is connected
