Manually setting the time:
Press the “MODE” button for at least 2 seconds to adjust the clock/calendar
settings.
Press the “UP” or “DOWN” button to adjust the settings and then press the
“MODE” button to confirm each setting.
The settings are displayed in the following order:
Time zone, year, month, day, hours, minutes.
The time zone is used for countries in which the DCF time signal can be
received, but that are in another time zone. If the time in a given country is
1 hour ahead of the radio controlled time of the DCF signal (GMT+1) the time
zone has to be set to the value +1. The clock will then automatically add 1
hour to the value of the received time signal.
If no button is being pressed for 10 seconds the setting mode will be closed.
Registering the remote sensor at the weather station:
After connecting the adapter, the base station will automatically start to
receive signals from the remote sensor.
Place the batteries in the remote sensor. The sensor will automatically send
the measured temperature to the base station.
Press the “UP” button for at least 3 seconds to clear the values and receive
new data again.
If the base station does not receive a signal, “ -- / --“ is displayed.
Alarm function:
Press the “MODE” button twice to display and set the set alarm time
When the alarm time is being displayed (
symbol visible
)
, press
the
“MODE” button for 3 seconds to adjust the settings. Press “UP” or “DOWN”
buttons to adjust the time settings. Press “MODE” button to confirm the
settings.
If no button is being pressed for 10 seconds, the setting mode will be closed.
To set the alarm, press the “DOWN’ button once. (
symbol visible
)
When the alarm sounds, this can be turned off temporarily for 5 minutes by
pressing the “SNZ” button. The Zz symbol flashes.
To stop the alarm permanently, press any button. The alarm is repeated the
next day. The
symbol remains visible.
To permanently switch off the alarm function, press the “DOWN” button
again.
symbol is no longer visible.
