Radio controlled clock:
After the device is switched on, the clock will automatically search for a DCF
time signal.
flashes to indicate that the device is searching for a DCF signal.
is continuously visible to indicate that the device has received a DCF
signal and the correct time/date is then displayed.
The device searches for a DCF signal for approximately 7 minutes. If the
device does not find any DCF signal, it stops searching and will try again after
one hour.
Every day at 03:00 hrs the clock searches for the signal to be able to keep
displaying the time as accurately as possible. If the clock can’t find any signal,
the search is stopped. The clock will try again at 04:00, 05:00 and 06:00 hrs.
You can also force the clock to search for the signal by pressing the “DOWN”-
button for 2 seconds.
The buttons do not work if the clock is searching for the DCF signal.
