12. SPECIAL FEATURES
13. CLEANING
Your new conveyor oven has been built with numerous enhancements to add flexibility and simplicity to
your cooking operation.
A.
INDEPENDENT TOP AND BOTTOM HEAT. Different temperature settings can be set for
both top and bottom heat zones.
B.
VARIABLE-SPEED CONVEYOR BELT
C.
FIELD-REVERSIBLE CONVEYOR BELTTRAVEL
D.
FRONT-REMOVABLE CONVEYOR BELT. No need to slide the belt assembly out the side.
E.
INDEPENDENT TOPAND BOTTOM OUTER SIDE COVERS. Makes it possible to remove
conveyor belt from the front.
F.
EASE IN CLEANING. This is accomplished by easily removable components for access to
the cook chamber, air plenum fingers, and conveyor belt assembly.
1. Remove crumb pans.
2. Remove plenum finger assemblies and disassemble for cleaning.
Standard construction of the exterior is
of stainless steel.
Deposits of baked-on splatter and grease, or discoloration may be removed by using any commercial
cleaner recommended for stainless steel. Always rub with the grains and apply very light pressure.
Standard construction of the interior
(cook chamber) is of aluminized steel, and requires care not to over-clean and scratch the surface.
. Use only the detergent solutions
and cleaners that meet national and/or local codes. Clean the walls of the cook chamber with a mild
soap and water solution.
To clean the interior of the conveyor oven, it is necessary to lower the hinged front door, the (4) outer
sides panels, the conveyor belt assembly, the (2) side frame spreaders and the (4) air plenum fingers.
Use only a damp cloth.
WEEKLY CLEANING:
Oven Exterior: CLEAN ONLY WHEN THE OVEN IS COOL.
Oven Interior:
CLEAN ONLY WHEN THE OVEN IS COLD.
VARIABLE HEAT/FIXED AIR
DO NOT CLEAN THE CONVEYOR OVEN WITHAWATER JET.
Rinse with a MOIST, NOT SOAKING, cloth.
CAUTION: DO NOT USE OVEN CLEANERS, CAUSTIC SOLUTIONS OR MECHANICAL MEANS
BECAUSE THESE WILL DAMAGE THE ALUMINIZED SURFACES
CAUTION: THE CONVEYOR OVEN CONTAINS ELECTRICAL COMPONENTS. TURN OFF THE OVEN
AND DISCONNECT THE POWER BEFORE CLEANING BEGINS.
Remove conveyor belt assembly.
12
